Vantec UGT-ST644R Manuel d'utilisateur télécharger pdf (Page 15)

UGT-ST644R Page 15

OCZ-VERTEX2 in Figure 10) and press Enter.

A menu pops-up, as shown Figure 10.

2. Select Erase RAID Config Data to delete the virtual disk, as

shown in Figure 10.

3. Select Ye s when prompted to confirm the erase operation.

Figure 10 Erase RAID Configuration Data

Rebuilding Virtual Disk

Note: The 4 Channel 6-Port SATA 6Gb/s PCIe RAID Host Card BIOS

supports manual rebuilding of RAID 1 virtual disks. The rebuild

process is both initiated and complete in the BIOS. The Marvell RAID

Utility (MRU), which runs in an OS environment, CANNOT be used

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Pas de commentaire

Vantec UGT-ST644R Manuel d'utilisateur Page 15